HOME MADE INCUBATOR EASY SETUP BY STEP

Good Day,

Today I am making a simple egg incubator which is easy to make & does not need much any complex parts incubator is a machine which easily maintain the temperature & humidity and when we put the eggs in it will hatch the eggs for any type of bird.


Require Things

  • 1x thermocole box 20 liter                  01
  • 1x Bulb holder                                    01
  • 1x 100 watt halogen bulb                   01
  • 1x 12v Digital Thermostat                 01
  • 1x 12v Fan                                         01
  • 1x 12v Adaptor                                  01
  • 3x Zipties                                           01
  • 1x Disposable plastic bowls              01
  • 1x 7 feet electrical wire                     01 


Ventilation & Exhaust

Making Ventilation and Exhaust
Making Ventilation and Exhaust
Making Ventilation and Exhaust
Making Ventilation and Exhaust
6 More Images
Make holes in 7 inches 3 times vertically by 1 inches apart on both sides and on the lid the holes must be half of pencil size

Electrical Wiring 

Wiring It Up
Wiring It Up
Wiring It Up
8 More Images
Wire the bulb holder and plug then take a 6 inches length from holder side and cut the one wire from there and take a 10 inches wire and connect it there it will go in the thermostat relay switch KO and K1.
Connect both fan and thermostat to 12v adaptor.

Attaching the Parts

Attaching the Parts
Attaching the Parts
Attaching the Parts
Attaching the Parts
9 More Images
Attach the bulb holder inside the box and secure it with zip tie and also attach the fan ,the fan must be facing toward the bulb so it blows the air on it.
Put the thermostat on outside front box make 3 holes for wires and glue it with hot glue, insert the 12v power and bulb relay wire in to the thermostat.
Stick the sensor on the upper side with masking tape over the other side of the bulb where the eggs will be put.

Observation Window

Observation Window
Observation Window
Observation Window
2 More Images
Cut out 3 inches diameter hole in the lid and glue the disposable plastic bowl cap over it.

 Finishing Steps

Finishing Steps
Finishing Steps
Finishing Steps
3 More Images
Put a cotton cloth inside the box and put eggs on it,also put water in a plastic bowl under the bulb so it will be warm and make humidity.
Temperature is set to 37.5 and difference is 0.5 and humidity should be between 55% to 60%
Need to turn the eggs 2 to 3 times per day ,mark the eggs with 0 and X on both sides so it will be easy to fully turn it next time
Thank you very much

Comments